Hear from Our Customers
You stop worrying about what’s happening behind those cracked panels. Water isn’t sneaking into your walls anymore. Your heating bills drop because air isn’t leaking through gaps that shouldn’t be there.
The exterior finally matches what you want people to see when they pull up. Not the peeling paint or the rotted boards you’ve been meaning to deal with. Just clean lines and a finish that doesn’t need your attention every spring.
And when it’s time to sell, you’re not scrambling to patch things up. Buyers see a home that’s been maintained. They see value. You recoup most of what you spent because fiber cement siding in Brentwood, NH is one of the few upgrades that actually pays you back.
We’ve been handling siding installation in Brentwood, NH and across the Seacoast for over two decades. We’re an Owens Corning Preferred Contractor, which means we meet standards most companies don’t bother with.
We know what New Hampshire weather does to exteriors. The freeze-thaw cycles. The ice dams. The way salt air creeps inland and eats through cheap materials. That’s why we only install products engineered for this climate—James Hardie, Premium Pointe, and other fiber cement options that won’t buckle or rot when the temperature swings forty degrees in a weekend.
You’re not getting a crew that disappears halfway through or leaves you chasing callbacks. You’re working with people who’ve earned a reputation in Brentwood, NH by showing up and doing the work right the first time.
We start with a free estimate at your property. You show us what’s failing, we assess the damage, and we talk through your options—vinyl, fiber cement, color, warranty, all of it. No pressure. Just information.
Once you’re ready to move forward, we schedule the work around your timeline. Our crew removes the old siding, inspects the sheathing and framing for rot or moisture damage, and addresses anything that needs fixing before new material goes up. House wrapping in Brentwood, NH is part of the process—it’s your moisture barrier, and we don’t skip it.
Then we install your new siding with proper flashing, caulking, and fastening. Every seam gets checked. Every corner gets sealed. When we’re done, you get a walkthrough to make sure everything meets your expectations and a warranty that actually means something if issues come up down the road.
Ready to get started?
You get a full exterior assessment before any work starts. We’re looking for hidden rot, water intrusion, structural issues—anything that’ll cause problems later if it’s not addressed now. That’s part of the estimate, not an upsell.
We handle the removal and disposal of your old siding. You’re not dealing with a dumpster in your driveway for weeks or hauling debris yourself. We also install proper house wrapping and moisture barriers, which is critical in Brentwood, NH where freeze-thaw cycles can drive water into places it shouldn’t go.
Your installation comes with manufacturer warranties on materials—up to 30 years non-prorated on fiber cement—and our own workmanship guarantee. We’re also available after the job if you have questions or need maintenance guidance. You’re not getting ghosted the day we finish.
And because we’re local, we understand Brentwood’s building requirements and climate challenges. We’re not learning on your project. We already know what works here.
Fiber cement typically runs higher than vinyl—usually between $8 and $12 per square foot installed, depending on the product, your home’s size, and how much prep work is needed. If we’re tearing off multiple layers of old siding or repairing sheathing, that adds to the scope.
But here’s what matters: you’re looking at 30-plus years of performance with minimal maintenance. Vinyl might save you money upfront, but it doesn’t hold up the same way in New Hampshire’s climate. It cracks in the cold, warps in the heat, and fades faster.
Fiber cement won’t rot, won’t attract pests, and won’t ignite if a fire starts. Some insurance companies even offer discounts for non-combustible siding. And when you sell, buyers pay more for homes with fiber cement because they know it lasts. You’ll recoup 80 to 90 percent of your investment at resale, which you can’t say about most home improvements.
We install siding year-round in Brentwood, NH, including winter. As long as temperatures are above the manufacturer’s minimum threshold—usually around 40°F for fiber cement and even lower for vinyl—the work gets done without issues.
Winter installations actually have some advantages. Crews are more available, so you’re not waiting months for a start date. And your home isn’t sitting with damaged siding through another freeze-thaw cycle, which just makes the problem worse.
The key is proper preparation. We make sure sheathing is dry before new material goes up, and we adjust our process for cold-weather conditions. Caulking, fasteners, flashing—it all gets handled according to the specs, regardless of season. If you’ve been putting this off because you think you need to wait for spring, you don’t.
If the damage is isolated to one area—maybe a few boards got hit by a falling branch or a section near a gutter failed—a repair might make sense. But if you’re seeing issues in multiple spots, or if your siding is more than 20 years old, replacement is usually the smarter move.
Here’s why: when siding starts failing, it’s rarely just what you can see. Water gets behind the panels and spreads. By the time you notice rot or buckling on the outside, there’s often damage to the sheathing or framing underneath. Patching visible problems doesn’t fix what’s happening behind them.
And if your siding is old, even a good repair won’t match the color or texture of the existing material. You end up with a patchwork look that hurts your home’s value. During our free estimate, we’ll pull back a section and show you what’s actually going on. Then you can decide based on real information, not guesswork.
Vinyl is lighter, less expensive, and easier to install. It comes in a lot of colors and styles, and it doesn’t need painting. But it doesn’t handle New Hampshire’s temperature swings as well. It can crack when it’s cold, warp when it’s hot, and fade over time. It’s also more vulnerable to impact damage from hail or debris.
Fiber cement—like James Hardie—is heavier and more durable. It’s designed for climates like ours, where you get extreme cold, heavy snow, and humid summers. It won’t rot, won’t attract termites, and it’s fire-resistant. It does need repainting every 10 to 15 years, but that’s manageable compared to replacing warped or cracked vinyl panels.
If you’re planning to stay in your home long-term or you want the best resale value, fiber cement is the better investment. If budget is tight and you need a solid option that’ll last 15 to 20 years, vinyl works. We’ll walk you through both during your estimate so you can make the call that fits your situation.
Most residential siding installations take one to two weeks, depending on the size of your home and the scope of the project. If we’re just replacing siding on a ranch with no major repairs, we’re usually done in a week. Larger homes or projects that involve fixing rot or structural issues take longer.
Weather can affect the timeline, especially if we hit a stretch of heavy rain or extreme cold. But we don’t drag things out. Our crews show up on schedule, work full days, and keep the site clean as we go.
You’ll know the estimated timeline before we start, and we’ll update you if anything changes. We’re not the kind of contractor that disappears for days or leaves your house half-finished for weeks. We get in, do the work right, and get out so you can move on with your life.
Yes. House wrapping in Brentwood, NH isn’t optional—it’s part of every siding installation we do. It’s your home’s defense against moisture that gets past the siding, which happens more than people realize.
We install a weather-resistant barrier over the sheathing before any siding goes up. This layer stops water from reaching the framing and insulation, which is critical in a climate where freeze-thaw cycles can push moisture into places it shouldn’t go. Without it, you’re setting yourself up for mold, rot, and structural damage that won’t show up until it’s expensive to fix.
We also make sure all flashing around windows, doors, and corners is installed correctly. That’s where most water intrusion happens, and it’s where a lot of contractors cut corners. We don’t. You’re getting a complete envelope that keeps your home dry and energy-efficient for the long haul.
Local Resources
Useful Links
