Hear from Our Customers
You stop worrying about water pooling around your foundation every time it rains. You’re not climbing ladders twice a year to clear out clogs. And you’re definitely not dealing with ice dams tearing apart your roofline come February.
That’s what functional gutters do. They move water where it needs to go—away from your house, your basement, your landscaping.
In Merrimack, that matters more than most places. You’re dealing with freeze-thaw cycles that wreck poorly installed systems. Heavy snow that tests every seam. Spring storms that expose weak points fast. When your gutters are fabricated on-site and fitted to your roofline with the right pitch, water doesn’t sit. It flows. And your home stays dry.
Paradise Remodeling Inc started as a home remodeling contractor over a decade ago, and we’ve been serving homeowners across southern New Hampshire and the North Shore ever since. We’re licensed, insured, and an Owens Corning Preferred Contractor—which means we meet standards most crews don’t.
We’re not the biggest operation in the state. But we show up when we say we will, we install gutters the right way, and we don’t leave until the job’s done correctly.
Merrimack homeowners deal with weather that punishes shortcuts. That’s why we fabricate seamless gutters on-site, custom-fit them to your home, and make sure the pitch is right before we ever pack up.
First, we come out and measure your roofline. Every house is different, so we’re looking at pitch, fascia condition, and where water’s going to hit hardest during a storm.
Then we fabricate your seamless gutters on-site using a machine that bends them to exact length. No seams means no weak points where leaks start. We’re usually working with aluminum—it’s durable, weather-resistant, and doesn’t rot or rust like older materials.
Once they’re ready, we mount them to your fascia with a secure fastening system and set the slope so water moves toward the downspouts without pooling. We also position downspouts to direct water away from your foundation, walkways, and garden beds. If you’re adding gutter guards, we install those at the same time so you’re not dealing with clogs from pine needles or ice buildup.
Most installations finish in a day. You’re not dealing with a drawn-out project or crews coming and going for a week.
Ready to get started?
You’re getting seamless gutters that are custom-fabricated to your home’s exact measurements. That means no joints, no seams, and no spots where debris piles up and causes problems.
The gutters are made from weather-resistant aluminum that holds up against New Hampshire’s seasonal extremes—heavy snow, ice, spring rain, summer storms. They come with a 20-year manufacturer’s warranty, so you’re covered long-term.
We also install a fastening system that keeps your gutters secure even when snow load or wind tries to pull them down. And we set the drainage slope correctly so water doesn’t sit in your gutters and freeze.
If you want gutter guards, we can add those during installation. They block leaves, pine needles, and ice buildup—which matters in Merrimack where clogged gutters lead to ice dams and roof damage fast. With guards, you’re not cleaning gutters twice a year or hiring someone else to do it.
Most homeowners in Hillsborough County pay between $5.88 and $8.00 per linear foot for seamless aluminum gutters, depending on the size of the home and how many corners and downspouts you need. A typical single-family home with four downspouts usually runs between $1,200 and $2,200 total.
That price includes the gutters themselves, professional installation, and the fastening system. If you’re adding gutter guards, expect another $3 to $6 per foot depending on the type.
We give you a fixed quote after measuring your roofline, so there are no surprise charges. And because we fabricate on-site, you’re not paying for pre-cut sections that don’t fit right and need adjustments later.
Most gutter installations finish in one day. We show up in the morning, measure and fabricate your gutters on-site, mount them to your fascia, set the pitch, and install downspouts. By the end of the day, your system’s up and functional.
Larger homes or complex rooflines might take a bit longer, but we’re usually done before dinner. You’re not dealing with a multi-day project or crews leaving equipment in your driveway for a week.
The reason we can move fast is because we’re fabricating seamless gutters right at your house. There’s no waiting on shipments or making return trips because sections don’t fit. We measure, we build, we install.
Sectional gutters are pre-cut pieces that get joined together with seams and connectors. Those seams are where leaks start, debris gets stuck, and ice builds up. Over time, the sealant breaks down and you’re dealing with drips, clogs, and water damage.
Seamless gutters are fabricated from one continuous piece of aluminum that’s custom-bent to your home’s measurements. No seams means no weak points. Water flows clean, debris doesn’t pile up, and you’re not resealing joints every few years.
In New Hampshire, that difference matters. Freeze-thaw cycles destroy sectional gutters fast. Seamless systems last 20+ years without the constant maintenance. You’re paying a bit more upfront, but you’re saving money and hassle long-term.
If you’ve got trees near your house—especially pine—you’re going to deal with clogs. Pine needles, leaves, and ice buildup block your gutters, water overflows, and you’re either climbing a ladder twice a year or paying someone to clean them out.
Gutter guards sit over your gutters and block debris while letting water through. They’re not perfect, but they cut maintenance way down. In Merrimack, they also help prevent ice dams, which form when clogged gutters trap water that freezes and backs up under your shingles.
Most homeowners who add guards don’t regret it. You’re not cleaning gutters in November before the snow hits, and you’re not dealing with ice damage in February. If you’re older, have mobility issues, or just don’t want to mess with ladders, guards are worth it.
You can try, but most DIY gutter jobs end up costing more to fix than they would’ve cost to install right the first time. The biggest issue is pitch—if your gutters aren’t sloped correctly, water pools instead of draining. That leads to leaks, overflow, and foundation problems.
You also need the right tools to fabricate seamless gutters, which most homeowners don’t have. Pre-cut sectional gutters from the hardware store are cheaper upfront, but they leak at the seams and need constant maintenance.
Professional installation means your gutters are measured, fabricated, and mounted with the correct slope and fastening system. We’re done in a day, and you’ve got a system that actually works. If something goes wrong, you’ve got a warranty and a crew to call. DIY jobs don’t come with that.
If you’re seeing water pooling around your foundation after it rains, that’s the clearest sign. Other red flags: gutters pulling away from the fascia, visible cracks or holes, rust spots, or water stains on your siding below the roofline.
Inside your house, check your basement for moisture or mildew. Clogged or broken gutters let water seep into your foundation, and that shows up as dampness, cracks, or even flooding during heavy rain.
If your gutters are sagging or you’re constantly cleaning out clogs, replacement makes more sense than patching things together. Seamless gutters with guards eliminate most of those problems and last 20+ years. You’re not dealing with the same issues every season.
Local Resources
Useful Links
Other Services we provide in Merrimack
