Hear from Our Customers
Your siding takes a beating in Hollis, NH. Winter freeze-thaw cycles crack caulking and loosen panels. Spring humidity grows mold in shaded areas. Summer sun fades color and warps cheaper materials.
Most homeowners don’t think about their siding until water stains appear inside. By then, you’re looking at repair costs between $870 and $16,000 depending on how far the damage spread. Regular maintenance catches loose panels, failed caulking, and early mold growth before they become structural problems.
Cleaning vinyl siding in Hollis, NH twice a year removes the dirt and organic material that trap moisture against your home. That moisture is what leads to rot, mold, and insulation damage. You’re not just keeping things looking nice—you’re preventing the conditions that cause real damage.
When siding fails, it’s rarely the material itself. It’s the small stuff that got ignored: a cracked seal here, a loose corner there, mildew that worked its way under a panel. Maintenance is about catching those things early.
We’ve handled siding maintenance in Hollis, NH and throughout the region for over a decade. We know what New Hampshire weather does to homes because we see it every day—the ice damage, the mold growth in wooded areas, the way cheap caulking fails after two winters.
Hollis sits in HardieZone HZ5, which means your siding needs to handle extreme temperature swings and year-round precipitation. We use materials and methods designed for this climate, not generic approaches that work fine in milder areas but fail here.
Our crew shows up on time, does the work right, and doesn’t try to upsell you on things you don’t need. You’ll get a straight answer about what condition your siding is in and what actually needs attention.
We start with a full inspection using a siding inspection checklist in Hollis, NH that covers every panel, seal, and trim piece. We’re looking for cracks, loose sections, failed caulking, water stains, mold growth, and any signs that moisture is getting behind your siding.
Next comes cleaning. This isn’t about blasting everything with a pressure washer—that’s actually how most DIY jobs cause damage. We use soft washing for vinyl and fiber cement, which means low-pressure application of cleaning solution that kills mold and mildew without forcing water into seams or cracking panels.
For mold and mildew removal in Hollis, NH, we treat affected areas with solutions that eliminate growth at the root and prevent it from coming back quickly. Shaded areas and north-facing walls need different treatment than sunny exposures.
After cleaning, we handle any repairs identified during inspection: resealing joints, replacing damaged panels, fixing loose corners, and addressing any areas where water could penetrate. You get a clear explanation of what we found and what we fixed.
The whole process typically takes a day for most homes. You’re left with siding that’s clean, sealed, and ready to handle another New Hampshire winter without letting water into your walls.
Ready to get started?
Our siding maintenance in Hollis, NH covers inspection, cleaning, mold removal, minor repairs, and resealing. We check every accessible section of your siding for damage, test caulking and seals, and identify any areas where water might be getting through.
Cleaning vinyl siding in Hollis, NH requires understanding the difference between power washing vs soft washing. Power washing uses high pressure that can crack panels, force water behind siding, and strip protective coatings. Soft washing uses specialized cleaning solutions at low pressure to safely remove dirt, algae, mold, and mildew without damaging your siding.
New Hampshire’s climate creates perfect conditions for mold growth. High humidity, frequent rain, and shaded areas on your home allow mold and mildew to establish quickly. Our mold and mildew removal in Hollis, NH eliminates existing growth and treats surfaces to slow regrowth. This matters for more than appearance—mold on your siding often means mold is growing in the wall cavity behind it.
We also handle the small repairs that prevent big problems: replacing cracked panels, resealing around windows and doors, fixing loose trim, and addressing any areas where previous repairs were done poorly. Most maintenance visits include some level of repair work because there’s always something that needs attention after a New Hampshire winter.
Twice a year is the standard recommendation—once in spring to address winter damage, and once in fall to prepare for cold weather. Spring inspection catches ice damage, failed seals, and any panels that loosened during freeze-thaw cycles. Fall maintenance ensures everything is sealed and ready before snow and ice arrive.
Some homes need more frequent attention. If you have significant tree coverage, you’ll deal with more mold and mildew growth. If your home sits in a particularly exposed location, wind-driven rain may require additional seal checks. If you’re seeing mold growth or noticing dirt buildup between scheduled cleanings, that’s a sign you need more frequent service.
The cost of twice-yearly maintenance is a fraction of what you’ll pay for major repairs. Replacing rotted sheathing, fixing water damage inside walls, or replacing entire sections of siding runs into thousands of dollars. Regular cleaning and inspection typically costs a few hundred dollars and prevents those expensive problems.
Power washing uses high-pressure water to blast away dirt and grime. Soft washing uses low-pressure application of cleaning solutions that do the actual work of breaking down organic growth, dirt, and stains. The difference matters because high pressure can damage your siding.
Vinyl siding isn’t designed to withstand 3000+ PSI pressure. Power washing can crack panels, force water behind siding into your wall cavity, strip protective coatings, and loosen panels from their mounting. It looks effective because it removes surface dirt quickly, but it often causes hidden damage that shows up months later as water stains, mold growth, or loose sections.
Soft washing for cleaning vinyl siding in Hollis, NH uses about 500 PSI or less—roughly the same pressure as a garden hose with a spray nozzle. The cleaning solution does the heavy lifting: it kills mold and mildew, breaks down organic stains, and loosens dirt so it rinses away easily. The result is cleaner siding without the risk of damage. For fiber cement, wood, and composite siding, soft washing is even more critical because these materials are more vulnerable to pressure damage than vinyl.
If you see black, green, or brown streaks on your siding, that’s mold or mildew. It typically appears first on north-facing walls, under eaves, and in shaded areas where sunlight doesn’t reach. The streaks start small but spread quickly once established, especially during humid months.
Mold on your siding isn’t just cosmetic. It indicates moisture is staying on your home’s surface long enough for organic growth to establish. That same moisture is likely penetrating seals and getting into your wall cavity. Mold growth on the outside often means mold is growing inside your walls, where it damages insulation and structural materials.
Mold and mildew removal in Hollis, NH requires more than just washing it off. The growth needs to be killed at the root and the surface needs treatment to prevent immediate regrowth. Standard cleaning solutions don’t always eliminate mold completely—it comes back within weeks. Professional treatment uses products designed specifically for mold elimination and prevention. If you’re dealing with recurring mold growth, there’s usually an underlying issue: poor drainage, failed seals, or inadequate ventilation that needs to be addressed alongside the cleaning.
A thorough siding inspection checklist in Hollis, NH covers panels, seals, trim, and any areas where different materials meet. Start by walking the perimeter of your home looking for obvious damage: cracks, holes, loose sections, or areas where siding has pulled away from the wall. Check all caulking around windows, doors, corners, and trim—if it’s cracked or pulling away, water is getting in.
Look for water stains, discoloration, or warping, which indicate moisture problems. Check that all panels are properly locked together with no gaps. Inspect areas where siding meets other materials like stone, brick, or different siding types—these transitions are common failure points. Look under eaves and overhangs for rot or water damage. Check that weep holes at the bottom of walls aren’t blocked.
For homes in Hollis, pay special attention to areas that take the brunt of winter weather: south and west-facing walls that get hit with wind-driven rain and snow. Check corners and edges where ice dams might have formed. Look for any areas where snow accumulation against the house might have forced moisture behind siding. Most homeowners miss the subtle signs—slightly loose panels, small cracks in caulking, early mold growth—that turn into expensive repairs if ignored.
You can handle basic cleaning if you have the right equipment and knowledge, but most homeowners either use too much pressure or miss problems during inspection. The inspection part is actually more important than the cleaning—identifying small issues before they become structural problems is what saves you money.
If you decide to clean your own siding, never use a pressure washer above 1500 PSI, and keep the nozzle at least 18 inches from the surface. Use a cleaning solution designed for siding, not household cleaners that can damage materials or harm landscaping. Work from bottom to top when applying cleaner, and top to bottom when rinsing. Don’t spray upward under panel edges—that forces water behind your siding.
The problem is that DIY cleaning often causes more damage than it prevents. We regularly fix issues created by homeowners who used too much pressure, sprayed water into seams, or missed areas where water was already penetrating. Professional siding maintenance in Hollis, NH costs less than fixing damage from improper cleaning. We also catch the issues you wouldn’t know to look for: failed seals, early rot, improper previous repairs, and areas where your siding isn’t performing as it should. The inspection and minor repairs that come with professional service are what actually protect your investment.
Vinyl siding typically lasts 20-40 years with proper maintenance. Fiber cement lasts 30-50 years or more. Wood siding can last 40+ years if maintained correctly, though it requires more frequent attention than vinyl or fiber cement. The key phrase is “with proper maintenance”—neglected siding fails well before its expected lifespan.
New Hampshire weather accelerates wear. Freeze-thaw cycles stress materials and seals. Ice dams force water behind siding. UV exposure fades and weakens cheaper vinyl. Without regular maintenance, you’ll see problems within 10-15 years even on quality materials. With maintenance, you can reach or exceed the manufacturer’s projected lifespan.
The return on maintenance is significant. If your siding costs $15,000 to replace and lasts 30 years with maintenance versus 15 years without it, you’ve saved $15,000 plus avoided the hassle of premature replacement. Regular cleaning and inspection costs maybe $400-600 per year. Over 30 years, you spend $12,000-18,000 on maintenance but avoid a $15,000 replacement plus the interior damage that often accompanies siding failure. The math works strongly in favor of maintenance, especially in climates like Hollis, NH where weather is hard on homes.
Local Resources
Useful Links
