Hear from Our Customers
Your heating bill drops because cold air stops sneaking through gaps and cracks. That’s what proper insulation and installation do—they create a thermal barrier that keeps your home comfortable year-round.
You stop worrying about water damage behind your walls. When siding is installed correctly with proper flashing and sealing, moisture stays outside where it belongs. No more wondering if that dark spot means rot or mold growing where you can’t see it.
Your home looks updated without constant maintenance. Quality materials like fiber cement or insulated vinyl hold their color and shape through freeze-thaw cycles, heavy snow loads, and summer humidity. You’re not out there every spring scraping, caulking, or repainting just to keep things from falling apart.
Paradise Remodeling Inc has worked on homes throughout Litchfield for nearly two decades. We know what New Hampshire weather does to exterior surfaces because we’ve seen it, fixed it, and prevented it on hundreds of properties.
Litchfield homes face specific challenges—freeze-thaw cycles that crack inferior materials, ice dams that force water under siding, and humidity that breeds mold in poorly ventilated wall systems. We account for all of it in every installation.
You’re not getting a crew that learned siding from YouTube videos. Our installers understand building science, proper flashing techniques, and how to detail around windows, doors, and roof lines so water drains away from your structure instead of into it.
We start with an inspection of your existing siding and sheathing. If there’s rot or structural damage underneath, you need to know before new siding goes up. We check for it, document it, and give you options for addressing it.
Next comes material selection. We walk you through vinyl, fiber cement, composite, and wood options with honest pros and cons for each. Fiber cement costs more upfront but lasts 50+ years and resists New Hampshire’s weather better than anything else. Insulated vinyl costs less and still gives you significant energy savings. We don’t push you toward the most expensive option—we help you choose what makes sense for your budget and timeline.
Installation starts with proper prep work. Old siding comes off, sheathing gets inspected and repaired if needed, and a weather-resistant barrier goes up before any new material touches your house. Then we install with attention to expansion gaps, proper nailing patterns, and flashing details that prevent water intrusion. Every seam, every corner, every transition point gets sealed correctly.
Ready to get started?
You get free siding estimates in Litchfield, NH with detailed material breakdowns and labor costs. No vague “we’ll figure it out later” pricing. You know what you’re paying for before we start.
Material options include vinyl in multiple profiles and colors, fiber cement that mimics wood without the maintenance, composite materials that combine durability with aesthetics, and real wood for historic renovations or specific architectural styles. We source from manufacturers who back their products with transferable warranties—James Hardie, CertainTeed, LP SmartSide—not bargain brands that fail in five years.
Installation includes removal and disposal of old siding, sheathing repair where needed, house wrap or weather barrier installation, new siding with proper fastening and sealing, trim work around windows and doors, and cleanup that leaves your property looking better than when we arrived. Litchfield properties often have mature landscaping and established gardens—we protect them during the job, not trample through them with equipment.
You also get realistic timelines. Most residential siding projects take one to three weeks depending on home size and weather delays. We don’t promise two-day miracles that result in sloppy work. Quality installation takes time to do right.
Vinyl siding replacement typically runs $8,000 to $15,000 for an average-sized home in Litchfield. Fiber cement costs more—usually $15,000 to $25,000—but lasts twice as long and adds more resale value. Composite materials fall somewhere in between.
Price depends on your home’s square footage, how much trim and detail work you have, whether we’re removing one layer or multiple layers of old siding, and what repairs we find underneath. A 1,500 square foot ranch costs less than a 2,500 square foot colonial with dormers and complex rooflines.
We provide itemized estimates that break down material costs, labor, disposal fees, and any additional work like sheathing repair or window trim replacement. You see exactly where your money goes. Most homeowners recoup 75-95% of siding replacement costs when they sell, and fiber cement can return over 100% in some markets.
Fiber cement handles New Hampshire’s climate better than anything else. It doesn’t crack during freeze-thaw cycles, resists moisture without rotting, holds paint for 15+ years, and stands up to ice, snow, and wind without warping. James Hardie and LP SmartSide are the top performers.
Insulated vinyl is the second-best option if budget matters. Modern insulated vinyl has come a long way—it won’t crack in cold weather like old vinyl did, and the foam backing adds genuine R-value that cuts heating costs. It costs less than fiber cement and requires almost no maintenance.
Wood siding looks beautiful but demands regular maintenance in our climate. You’re repainting or restaining every 5-7 years, and you need to stay on top of caulking and sealing or moisture gets in and causes rot. It works for historic homes where authenticity matters, but most Litchfield homeowners prefer low-maintenance alternatives.
Most homes take one to three weeks from start to finish. A simple ranch with minimal trim might be done in a week. A larger colonial with multiple stories, dormers, and detailed trim work takes closer to three weeks.
Weather delays are real in New Hampshire. We can’t install in heavy rain, and some materials shouldn’t be installed below certain temperatures. If we’re working in spring or fall and hit a cold snap or rainy stretch, the project pauses until conditions improve. Rushing installation in bad weather leads to problems—improper sealing, moisture trapped behind siding, materials that don’t expand and contract correctly.
We give you a realistic timeline upfront and keep you updated if weather or unexpected repairs push things back. Most delays come from finding rot or structural issues once old siding comes off. If your sheathing needs replacement or you have water damage in wall cavities, that adds time—but it’s time well spent fixing problems before they get worse.
Yes, if your current siding is old or poorly installed. Insulated vinyl siding adds R-value between R-2 and R-5 depending on the product. That’s not huge, but it’s enough to make a noticeable difference when combined with proper air sealing during installation.
The bigger energy savings come from eliminating gaps and air leaks. Old siding develops cracks, loose joints, and gaps around windows and doors that let cold air pour in during winter. When we install new siding with proper house wrap, flashing, and sealing, we create a continuous thermal barrier that stops air infiltration.
Most Litchfield homeowners see a 10-20% reduction in heating costs after siding replacement, especially if their old siding was original to a home built in the 1970s or 1980s. The exact savings depend on your home’s insulation, windows, and how drafty it was before. Fiber cement with rigid foam insulation underneath delivers the best performance, but even standard vinyl with good installation practices improves energy efficiency.
Usually, yes. Partial siding replacement rarely makes sense unless you’re fixing localized damage from a storm or accident. Matching old siding is difficult—manufacturers discontinue colors and profiles, and even if we find the same product, weathered siding won’t match new material.
Partial replacement also doesn’t address the underlying issues that caused problems in the first place. If one section is failing due to moisture intrusion or poor installation, other sections are likely experiencing the same stress. You end up paying for installation twice—once for the patch job, and again a few years later when the rest fails.
The exception is if you’re doing a phased renovation and want to tackle one side of the house per year for budget reasons. That can work if we plan it correctly and use materials we can source consistently. But from a cost-efficiency standpoint, doing the whole house at once saves money on setup, scaffolding, and labor mobilization.
Look for warping, cracks, or loose panels that span multiple sections of your home. If damage is widespread rather than isolated to one area, replacement makes more sense than patching. Also check for soft spots when you press on siding—that indicates rot in the sheathing underneath, which means the problem goes deeper than surface damage.
Fading and chalking across your entire house signals that the material has reached the end of its lifespan. Vinyl becomes brittle when UV protection breaks down, and paint on wood or fiber cement fails after too many years of sun exposure. You can repaint fiber cement or wood, but if the substrate is compromised, paint won’t fix it.
Rising energy bills combined with visible siding damage usually mean your exterior envelope is failing. Air leaks around windows, gaps at corners, and deteriorated caulking all point toward replacement. We can assess your siding during a free estimate and give you an honest answer about whether repair or replacement makes sense for your situation and budget.
Local Resources
Useful Links
Other Services we provide in Litchfield
