Hear from Our Customers
Your heating bill drops. You’re not cranking the thermostat just to stay comfortable anymore because your walls are actually insulated and sealed the right way.
The drafts stop. No more cold spots near windows or feeling like the wind is cutting through your living room during January.
Your home looks updated, sure—but more than that, it’s protected. Water isn’t sneaking behind old panels. Pests aren’t finding gaps. And you’re not repainting or patching every few years because the material you chose was built to last through New England’s freeze-thaw cycles without warping or cracking.
We’ve been handling siding and exterior work in Massachusetts for over six years. We’re licensed (HIC #195972), insured, and we’ve seen what happens when siding isn’t installed correctly in this region.
Hanscom AFB sits in a climate zone where winter temperatures regularly drop below freezing and humidity swings hard in summer. That means your siding needs to handle expansion, contraction, ice, wind, and moisture—not just look good from the curb.
We use materials rated for this exact zone. We don’t cut corners on house wrapping or flashing. And if something needs attention after the job, we respond—not six weeks later, but when you reach out.
We start with an inspection of your current siding and sheathing. If there’s rot, water damage, or structural issues underneath, we flag it before any new material goes up.
Next comes the house wrapping. This is the moisture barrier that keeps water from getting behind your siding and into your walls. It’s not optional, and it’s not something you skip to save a few bucks. We install it correctly, with proper overlap and sealing around windows and doors.
Then we install the siding itself—whether that’s vinyl, fiber cement, or James Hardie—with the right fastening, spacing, and flashing. Every seam gets checked. Every corner gets sealed. The goal is an envelope that keeps the weather out and your conditioned air in.
Final step is trim work, cleanup, and a walkthrough so you see exactly what was done and how to maintain it going forward.
Ready to get started?
Fiber cement siding costs more upfront than vinyl—but it also lasts longer, resists fire better, and holds up against woodpeckers, hail, and impact damage that would crack or dent other materials. In Massachusetts, where freeze-thaw cycles are brutal, fiber cement doesn’t warp or buckle the way vinyl can.
James Hardie is engineered specifically for climate zones like ours. Their HZ5 product line is built for the seasonal extremes we get around Hanscom AFB. It won’t rot, it won’t attract pests, and the ColorPlus finish is baked on—so you’re not repainting every five years.
You’ll also see energy savings. Insulated siding adds R-value to your walls, which translates to less heat loss in winter and better temperature control year-round. Homeowners typically see a 15-20% drop in energy costs after a proper siding replacement, and that adds up fast when you’re heating a home through a New England winter.
And if you’re thinking about resale, siding replacement recoups around 68-80% of the cost when you sell. It’s one of the highest-ROI exterior upgrades you can make.
Cost depends on material, square footage, and the condition of what’s underneath your current siding. Vinyl is the most affordable option, usually running lower per square foot installed. Fiber cement costs more upfront but lasts 30-50 years with minimal maintenance.
If we find rot or water damage during the inspection, that adds to the scope—but it’s better to fix it now than let it spread behind new siding. We’ll walk the exterior with you and give you a breakdown that’s specific to your home, not a generic estimate pulled from a calculator.
Most homes in this area fall within a predictable range once we account for material choice and any prep work. We don’t inflate numbers, and we don’t surprise you halfway through the job with “unforeseen costs” that should’ve been caught during the estimate.
Vinyl is lightweight, affordable, and low-maintenance. It comes in a lot of colors and styles, installs quickly, and doesn’t need painting. The downside is it can crack in extreme cold, warp in heat, and it’s not as impact-resistant as fiber cement.
Fiber cement is heavier, more durable, and handles temperature swings better. It won’t melt, won’t attract pests, and it’s fire-resistant—which matters if you’re near wooded areas or concerned about ember exposure. It also holds paint longer and looks more like real wood if that’s the aesthetic you want.
For Hanscom AFB’s climate, fiber cement performs better long-term. It’s built for freeze-thaw cycles and doesn’t expand or contract as much as vinyl. If your priority is durability and you’re planning to stay in the home for a while, it’s worth the extra cost.
Yes. House wrapping is your moisture barrier, and it’s what keeps water from getting into your wall cavities when wind-driven rain hits your siding. Even the best siding isn’t completely waterproof—water can get behind it through seams, around windows, or from ice dams in winter.
The wrap sheds that water down and out, away from your sheathing and insulation. Without it, you’re inviting rot, mold, and structural damage that you won’t see until it’s expensive to fix.
We install house wrapping on every siding job, with proper overlap and sealing around penetrations. It’s not a place to cut corners, and any contractor who suggests skipping it to save money is setting you up for problems down the road.
Most residential siding jobs take one to two weeks, depending on the size of your home and the material we’re installing. Fiber cement takes a bit longer than vinyl because it’s heavier and requires more precise cutting and fastening.
Weather can slow things down—we’re not installing siding in a downpour or when temperatures drop too low for adhesives and caulking to cure properly. We’d rather pause for a day than rush through and compromise the install.
You’ll have access to your home the whole time. We’re not blocking doors or making the place unlivable. We clean up at the end of each day, and we’ll give you a timeline upfront so you know what to expect and when we’ll be finished.
Yes. We’re experienced with James Hardie fiber cement and we install their HZ5 product line, which is specifically rated for Massachusetts’ climate zone. That means it’s engineered to handle the freeze-thaw cycles, humidity, and temperature swings you get around Hanscom AFB.
James Hardie comes with a 30-year limited warranty on the product and a 15-year warranty on their ColorPlus finish. The color is baked into the material during manufacturing, so it resists fading better than field-applied paint.
Installation matters with fiber cement—it’s not a DIY-friendly material, and if it’s not installed correctly, you lose the warranty and the performance benefits. We follow James Hardie’s installation standards, which means proper fastening, correct spacing for expansion, and the right flashing and sealing around windows and doors.
If your current siding is old, damaged, or poorly insulated, yes—new siding will lower your energy bills. Insulated vinyl siding adds about R-5 to your wall assembly, which reduces heat transfer and makes your HVAC system work less to maintain temperature.
Homes with air leaks around siding seams, windows, or trim lose conditioned air constantly. You’re paying to heat or cool air that’s escaping through gaps you can’t see. A proper siding installation seals those leaks and tightens up your building envelope.
Most homeowners see a 15-20% reduction in heating and cooling costs after a siding replacement, especially in older homes where the original siding has degraded. That’s real money back in your pocket every month, and it adds up over the 30-50 year lifespan of quality siding.
Local Resources
Useful Links
Other Services we provide in Hanscom Afb
