Hear from Our Customers
Your gutters do one job: move water away from your foundation. When they fail, you’re looking at cracked foundations, flooded basements, and rotted fascia boards. In Raymond, where homes average 40+ years old, that risk is real.
Seamless gutters eliminate the weak points where debris clogs and leaks start. They’re fabricated on-site to fit your roofline exactly, with no joints to separate when ice builds up or snow slides off your roof.
You get a system that channels water where it belongs, even during New Hampshire’s freeze-thaw cycles. No more climbing ladders to clear clogs. No more watching water pour over the sides during rainstorms. Just a gutter system that works when you need it most.
We specialize in exterior work that holds up to New England weather. We’re not generalists who do gutters on the side—this is what we do, and we’ve been doing it long enough to know what works in Raymond’s climate.
Your home faces wet falls, brutal winters, and debris-heavy springs. We account for that with heavy-gauge aluminum, closer hanger spacing for snow load, and proper pitch to prevent standing water that freezes.
We live and work in this area. We know the homes here, the weather patterns, and what fails when shortcuts get taken. You’re getting installers who understand that your 1980s colonial needs different considerations than new construction.
We start with measurements at your property. We’re looking at roofline length, pitch requirements, downspout placement, and any problem areas where water currently pools or overflows.
Once you approve the estimate, we schedule installation—most jobs finish in a day. We fabricate your seamless gutters on-site using our mobile equipment, cutting each section to exact length. No seams means no weak points where leaks develop.
We remove your old gutters if needed, install new hangers at proper spacing for snow load, and mount your new system with the correct pitch for drainage. Downspouts get positioned to move water away from your foundation, not just dump it at the base of your house.
After installation, we test water flow, clean up all debris, and run a magnet sweep for any screws or fasteners. We haul away your old gutters. You’re left with a functioning system and a clean property.
Ready to get started?
You’re getting custom-fabricated seamless aluminum gutters in the color that matches your home. We include all hangers, brackets, end caps, and downspouts needed for a complete system.
In Raymond, where fall foliage and pine needles create constant debris, gutter guards make sense for most homes. They prevent clogs that lead to ice dams in winter and overflow during spring rains. We install guards that actually work—not the cheap mesh that clogs itself.
We also install drip edge extensions where needed. These prevent water from sneaking behind your gutters and rotting your fascia boards—a common problem in older Raymond homes where original construction didn’t include proper flashing.
Every installation includes our workmanship warranty. If there’s a leak or separation due to installation error, we fix it. You’re also covered by the manufacturer’s warranty on materials. We handle the paperwork if you ever need to use it.
Most Raymond homes run between $1,500 and $3,000 for complete gutter installation, depending on your home’s size and roofline complexity. A typical ranch with 150 linear feet of roofline falls on the lower end. Two-story colonials with 250+ linear feet cost more.
That price includes removal of old gutters, new seamless aluminum gutters, all hangers and hardware, downspouts, and complete cleanup. If you’re adding gutter guards, expect another $800 to $1,500 depending on the system and linear footage.
We give you an exact price after measuring your home. No surprises, no “starting at” pricing that doubles once we show up. You’ll know what you’re paying before we schedule anything.
Properly installed seamless aluminum gutters last 20 to 30 years in New Hampshire, even with our harsh winters. The aluminum doesn’t rust like old steel gutters, and the seamless design eliminates the joints that typically fail first.
What kills gutters early is poor installation—wrong pitch, inadequate hangers, or improper downspout placement. When gutters hold standing water, it freezes in winter and expands, warping the metal. When hangers are spaced too far apart, snow load bends the gutters.
We install with New Hampshire weather in mind: closer hanger spacing, proper pitch for drainage, and heavy-gauge material that handles ice and snow without deforming. That’s how you get 25+ years instead of needing replacement in 10.
If you have trees anywhere near your house, gutter guards will save you money and risk. Raymond has plenty of mature oaks, maples, and pines—all of which drop debris that clogs gutters fast.
Clogged gutters overflow during rain and create ice dams in winter when melting snow can’t drain. Ice dams force water under your shingles and into your attic. Fixing that damage costs thousands more than installing guards upfront.
Guards also mean you’re not climbing a ladder multiple times a year to scoop out wet leaves and pine needles. Over 500,000 people get hurt falling off ladders annually, and a good portion of those are homeowners cleaning gutters. Guards aren’t just convenient—they’re safer.
If your gutters leak due to installation error, we come back and fix it at no charge. Our workmanship warranty covers installation issues—that includes leaks at seams, improper pitch causing overflow, or hangers that fail.
Seamless gutters rarely leak when installed correctly because there are no joints along the runs. The only seams are at corners and end caps, which we seal properly. If you do get a leak, it’s usually at a downspout connection or where the gutter meets the fascia.
We also install drip edge extensions on homes that need them. These prevent water from running behind the gutter and rotting your fascia boards—a problem that looks like a gutter leak but is actually a flashing issue. We address both during installation.
Most residential gutter installations in Raymond finish in one day. We show up in the morning, remove old gutters if needed, fabricate and install your new seamless system, test everything, and clean up before we leave.
Larger homes or complex rooflines might take a day and a half. If we’re also installing gutter guards, add a few hours. We’ll tell you the timeline when we give you the estimate so you can plan accordingly.
We don’t drag jobs out. Our crew stays until the work is done right, but we’re not tearing up your property for a week. You get a functioning gutter system and your normal routine back quickly.
We can install gutters in winter as long as temperatures are above freezing and conditions are safe. The sealants and materials we use need temps above 32°F to cure properly.
Most Raymond homeowners schedule gutter work in spring, summer, or fall when weather is predictable. But if you have an urgent need—like a section that failed and is dumping water against your foundation—we can often work around winter weather.
The best time to replace gutters is before you need to. If your current system is 20+ years old, showing rust, pulling away from the fascia, or overflowing during rain, don’t wait until winter storms cause damage. Schedule installation when weather isn’t a factor.
Local Resources
Useful Links
Other Services we provide in Raymond
