Hear from Our Customers
When your gutters work right, you don’t think about them. Water flows where it should. Your basement stays dry. Ice doesn’t build up along the roofline and force melting snow back under your shingles.
That’s what proper rain gutter installation does. It channels water away from your foundation before it can seep into your basement or erode the soil around your home. In Pelham, where we get over 63 inches of snow every year, that protection matters even more.
You’re not just avoiding a mess. You’re preventing thousands in foundation repairs, roof damage, and interior water issues that start small and get expensive fast.
We’ve been handling home improvement projects across New Hampshire and Massachusetts for over a decade. We’re an Owens Corning Preferred Contractor, which means we meet strict standards for quality and service that most companies don’t.
We’re fully insured, and every gutter installation comes with a 5-year installation warranty plus a 20-year manufacturer’s warranty. That’s not just coverage—it’s accountability.
Pelham homeowners deal with specific challenges: heavy snow loads, ice dams, freeze-thaw cycles that wreck poorly installed systems. We fabricate gutters on-site, custom-fit to your home, using heavy-gauge aluminum that holds up when cheaper materials fail.
First, we come to your property and assess what you actually need. Not every home needs the same setup, and we’re not going to sell you something that doesn’t fit your roof pitch, snow load exposure, or drainage situation.
Once we’ve measured and planned, we fabricate your seamless gutters right there on-site. No seams means fewer leak points. Custom fitting means proper pitch and alignment from the start. We use the heaviest-gauge aluminum available and space hangers closer together than standard installs—because New Hampshire winters demand it.
Installation typically takes one day. We remove your old gutters if needed, install the new system, test water flow, and clean up completely. That includes magnet-sweeping for screws and hauling away all debris. You’re not left with a mess in your driveway.
If you’re adding gutter guards, we install those at the same time. They keep pine needles, leaves, and ice buildup from clogging your system—which is critical for preventing ice dams during those freeze-thaw cycles Pelham sees every winter.
Ready to get started?
You get seamless rain gutters fabricated on-site and custom-fit to your exact measurements. We’re not cutting pre-made sections and piecing them together. Every run is continuous, which eliminates the weak points where most gutter systems start leaking.
We also size your downspouts based on your roof area and pitch. Pelham gets hit with seasonal rainstorms and rapid snowmelt. Undersized downspouts can’t handle the volume, which leads to overflow and the exact problems you’re trying to avoid.
Gutter guard installation is available and worth considering if you’ve got trees nearby. Clogged gutters don’t just overflow—they freeze. That creates ice dams, which force water back under your shingles and into your home. One ice dam event can cost thousands in repairs. Guards reduce that risk significantly.
Everything gets backed by our 5-year installation warranty and a 20-year manufacturer’s warranty. If something goes wrong because of how we installed it, we fix it. If the materials fail, they’re covered. You’re protected either way.
For a typical 2,000-square-foot home in Pelham, you’re looking at somewhere between $1,100 and $2,200 for seamless aluminum gutter installation. That’s based on about 200 linear feet of gutters, which is standard for most single-family homes.
The range depends on a few things: roof height, pitch, number of corners, and how many downspouts you need. If your roofline is complex or you’ve got multiple stories, expect to be on the higher end. If you’re adding gutter guards, that’s additional—but it’s also the best way to avoid constant maintenance and ice dam issues.
We don’t give quotes over the phone because every home is different. We come out, measure, and give you an exact price based on what your property actually needs.
Most gutter installations take one day. We show up in the morning, fabricate your gutters on-site, install them, test the system, and clean up before we leave.
If we’re also removing old gutters or installing gutter guards, it might stretch into a second day—but that’s rare. The process is efficient because we’re not waiting on materials or making multiple trips. Everything gets done in one visit.
You won’t have crews coming and going for a week. You won’t have half-finished work sitting on your roof. We finish the job, make sure water flows correctly, and you’re done.
If you’ve got trees anywhere near your house, yes. Pine needles and leaves clog gutters fast, and clogged gutters lead to ice dams during winter. Ice dams are a serious problem in Pelham—they form when snow melts, runs into a clogged gutter, and refreezes along the edge of your roof.
That frozen ridge blocks drainage, which forces water back up under your shingles. Once water gets under there, it seeps into your attic, insulation, and walls. We’ve seen cases where homeowners ignored ice dams and ended up with major roof reconstruction bills.
Gutter guards aren’t foolproof, but they dramatically reduce debris buildup and make ice dam formation much less likely. For most Pelham homeowners, they pay for themselves by eliminating the need to clean gutters twice a year—and by preventing expensive winter damage.
Regular gutters come in sections—usually 10-foot lengths—that get pieced together with connectors and sealed at the seams. Those seams are where leaks start. Over time, the sealant breaks down, the connectors shift, and water drips through.
Seamless gutters are fabricated in one continuous piece for each run of your roofline. No seams means no weak points. We bring the equipment to your property, measure each section, and form the gutter right there. It’s custom-fit and far more durable.
Seamless costs a bit more upfront, but you’re not dealing with leaks five years down the road. For New Hampshire weather—freeze-thaw cycles, heavy snow, ice—seamless is the only option that makes sense long-term.
Look for sagging, pulling away from the fascia, visible cracks or holes, or water spilling over the sides during rain. If you see rust or the gutters are visibly separating at the seams, they’re done.
Another sign: water pooling around your foundation after a storm. That means your gutters aren’t directing water away like they should. If your basement has flooded or you’ve noticed moisture along the foundation walls, failing gutters are often the cause.
Gutters typically last 20 to 30 years depending on material and maintenance. If yours are older than that, or if you’re seeing any of the issues above, replacement is smarter than trying to patch a failing system. Repairs might buy you a year or two, but you’ll end up replacing them anyway—and dealing with more damage in the meantime.
Yes, as long as temperatures are above freezing and conditions are safe for our crew. We’ve done winter installs in Pelham before, but we won’t work in ice, heavy snow, or when it’s too cold for materials to seal properly.
If you’re dealing with ice dams or gutter failure during winter, we’ll assess whether an emergency repair can hold you over until conditions improve—or if a full install is possible right away. Every situation is different.
That said, fall is the best time to install or replace gutters in New Hampshire. You’re ahead of winter, the weather is predictable, and your new system is ready to handle snow and ice from day one. Waiting until you have a problem in January makes everything harder and more expensive.
Local Resources
Useful Links
Other Services we provide in Pelham
